Mineral Infused Water Module (MIW™)

Parent Standard: Infused Water Standard (IWS™)
Category: Product & Design
Subcategory: Infused Water
Type: Product Module

Version: 1.0
Status: Canonical · Open Module
Effective Date: 25 April 2026

Authority: OOF®
Protection: MIP® — Methodological Intellectual Property
Canonical Language: English (UCL™)

Compatibility: IWS™ · Origin Eco™ · Product Integrity
Standards · Natural Systems

Canonical Definition

Mineral Infused Water Module (MIW™) defines the product-specific
conditions under which water may be naturally enriched through
contact with valid mineral source material while remaining
structurally identifiable as water and suitable for continuous
hydration.

Mineral infused water is valid only when mineral enrichment occurs
through natural contact-based release and does not transform water
into a fortified, additive-based, or chemically modified product.

Module Position

This module operates under the Infused Water Standard (IWS™).

IWS™ defines the parent hydration boundary.
MIW™ defines the mineral application of that boundary.

The module specifies when mineral source material may enrich water
without replacing its identity as water.

Base

Water remains the primary medium.
Mineral source material enables natural release through contact.
The output remains water.

The process does not create a supplement or chemically fortified
liquid.
It preserves hydration while allowing controlled mineral enrichment.

Core Principle

Mineral contact may enrich water.
It must not redefine it.

A valid mineral infused water system depends on passive release,
structural restraint, and preservation of hydration identity.

Product Conditions

For mineral infused water to remain valid within this module,
it must:

use water as the dominant medium
use natural mineral source material suitable for water
contact
rely on passive mineral release through contact
avoid direct mineral addition or artificial fortification
remain suitable for repeated hydration use

Valid mineral source materials may include natural mineral-bearing
materials suitable for controlled water contact under safe
conditions.

All source materials must remain:

safe
clean
suitable for human use
free from contamination and unsafe release behavior

Integrity Principle

Mineral infused water remains valid only when:

enrichment occurs through real contact-based release
no direct additive logic replaces mineral infusion
no forced mineralization or chemical alteration is used
output remains structurally water

If mineral loading redefines the function or identity of water,
the product exits this module.

Minimum Implementation Framework (MIF)

Step 1 — Water Base
Use clean water suitable for repeated hydration.

Minimum requirement:

water must remain the dominant medium
no additive-based mineral fortification may replace
infusion

Step 2 — Mineral Source Selection
Use mineral source material suitable for water contact and safe
human use.

Minimum requirement:

source material must be naturally suitable
source material must be clean and stable
no unsafe contamination or uncontrolled release may be
present

Step 3 — Contact-Based Infusion
Apply mineral enrichment through passive contact between water and
mineral source material.

Minimum requirement:

release must occur through contact
no direct addition of mineral substances may simulate
infusion
no artificial acceleration may replace natural release logic

Step 4 — Intensity Control
Control time, exposure, and contact conditions.

Minimum requirement:

enrichment must remain within hydration identity
output must not become a supplement-like or chemically
dominant liquid
mineral presence must not override structural water identity

Step 5 — Output Validation
Confirm final state.

Minimum requirement:

water remains dominant
output is suitable for continuous hydration
product is not structurally classified as fortified water,
supplement liquid, or chemically modified drink